Best Analog Rain Gauges 2026: Three Ways to Track Garden Rainfall
Compare three analog rain gauges for garden use, from a removable fence-mounted collector to a dual-scale stake and an adjustable-height yard gauge for beds.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
Prices and availability are accurate as of the time of publication and are subject to change.
The La Crosse 705-109 is our best overall analog rain gauge for a garden fence or deck, thanks to its removable collector and floating level marker. We compared three analog rain gauges by their published construction, mounting options and scales, so you can choose a useful way to measure rainfall without relying on a wireless display.
| Product | Best for | Price |
|---|---|---|
| La Crosse 705-109 Waterfall Rain Gauge | Best overall | View |
| AcuRite 00840A1 Rain Gauge | Best dual-scale gauge | View |
| JMBay Adjustable Rain Gauge | Best for taller planting | View |
How to choose analog rain gauges
Start with a mounting place. A deck rail or fence in an open part of the yard suits the La Crosse bracket; the AcuRite can hang or sit in the ground; the JMBay uses a separate two-pronged stake. A gauge placed beneath a roof edge or branches can collect drips or miss rain, so a convenient but sheltered spot is not necessarily a good measurement location.
Next consider how you will read and record water. The La Crosse uses a red float and collects up to 5 inches. The AcuRite has inch and centimetre markings and a 6-inch capacity. The JMBay places its removable tube higher on a sectional frame and also uses a float. None of these automatically sends readings or empties itself. Record the amount at a consistent time, then empty the collector so the next observation has a clear starting point.
La Crosse 705-109: best overall for a fence
La Crosse 705-109 Waterfall Rain Gauge
The 705-109 earns our overall pick because the everyday steps of reading, emptying and cleaning are well supported. Its clear collector slides off a two-hole mounting bracket, while a red float marks the water level. The listing specifies a 5-inch rainfall capacity and includes mounting hardware for a deck rail, fence or similar flat surface. A removable lid also gives access for a deeper clean. This makes it a sensible choice for a gardener with an exposed post close to a normal walking route. Its tradeoff is the need for a suitable mounting surface: unlike a ground stake, the bracket has to be attached. A very sheltered fence could also distort a reading, so choose the position carefully.
Pros
- Sliding collector makes emptying easier without removing the bracket
- Red float helps mark the water level
- Included two-hole bracket and screws suit a fence or deck rail
Cons
- Requires a suitable flat mounting surface
- Five-inch capacity can be exceeded during a very large storm
AcuRite 00840A1: best for two scales
AcuRite 00840A1 Rain Gauge
The AcuRite 00840A1 is the straightforward choice if you switch between inch and centimetre records. Its weather-resistant acrylic body collects up to 6 inches, or 15 centimetres, and carries both scales. An integrated stake goes into soil, while a hanging hole offers a second option on a pole or fence. That flexibility earns its badge for readers who want to use familiar units without converting every observation. It is a single simple collector, so there is no separate sliding bracket or raised metal frame like those on the other picks. You must read it at its installed height and remove or tip it to empty; choose a location where that is comfortable and where splashing from nearby surfaces is unlikely.
Pros
- Inch and centimetre markings avoid converting each reading
- Six-inch capacity gives more room than the La Crosse collector
- Integrated stake and hanging hole offer two mounting choices
Cons
- Ground placement may put the scale low to read
- No separate slide-off bracket for removing the collector
JMBay: best for taller planting
JMBay Adjustable Rain Gauge
The JMBay suits a yard where a low gauge would be hard to see among plants. Its sectional stand can be assembled to approximately 19 or 29 inches, and its two-pronged base anchors it in the ground. A red float and a coloured strip help distinguish the water level in the removable plastic tube. The listing describes a metal frame and a tube that can be lifted out for emptying, which is useful when the stand remains in place. Those height choices earn it the taller-planting badge, but they do not remove the need for an open exposure: leaves above the collector can still intercept rain. Assembly and a patch of soil are also needed, making it less convenient than a fence bracket for a paved deck.
Pros
- Two stand heights raise the tube above low planting
- Red float and coloured strip make the collected water easier to distinguish
- Removable tube can be emptied while the frame stays in the ground
Cons
- Sectional frame needs assembly before use
- Two-pronged ground base needs soil rather than a bare paved surface
Getting a useful reading
Keep the rim level and clear of branches, walls and roof runoff. After a storm, read the water level at eye height and record the observation period alongside the amount. Empty the collector before starting another interval and remove debris that could obstruct it. If a collector overflows, the displayed amount is only a minimum, not the complete storm total. These simple habits matter more than choosing a convenient spot where water falls from a roof.
FAQ
Can a rain gauge tell me whether to water my garden?
It shows rainfall collected at that location, which helps you put a recent storm in context. It does not measure moisture at the roots or tell you how quickly a particular soil drains. Check the soil around your plants as well, and adjust watering for the crop, weather and local restrictions.
Where should I mount an analog rain gauge?
Choose an open, level location away from overhanging branches and roof runoff. A post or rail works for the La Crosse bracket if it is not sheltered by a building. The AcuRite and JMBay can be placed in soil. Avoid sprinkler spray if you want the reading to represent rainfall alone.
What happens if rain exceeds the gauge capacity?
Water can overflow, so the amount left in the collector no longer represents the full storm. Record that the gauge overflowed instead of treating the maximum mark as an exact total. Where safe, check and empty it during prolonged rain and add the recorded intervals together.
Prices and availability were accurate at publication and may change.